Category Archives: Products News

Read all news about our products in our Product Range

T-REX Safety Products | T-REX Conveyor Belt Covers

T-REX Conveyor Belt Covers

T-Rex Safety Products | T-Rex Conveyor Belt Covers in PVC / Steel

FOR SAFETY AROUND THE CONVEYOR : Environmental protection and safety for personnel

T-REX Conveyor Belt Covers in PVC
✓ Resistance to corrosion and chemical aggression;
✓ Fire classification B1 (self-extinguishable and non-flammable);
✓ Low weight.

T-REX Conveyor Belt Covers in Steel
✓ Unbreakable, weatherproof resistant to frost and ultra violet light;
✓ Fire classification M 0;
✓ Easy to install, maintenance free.

AVAILABLE FROM STOCK, PLEASE CLICK HERE TO OPEN PDF
Type Profile
Belt width Fixings
Conveyor Covers PVC
T-Rex Safety Products | T-Rex Conveyor Belt Covers in PVC T-Rex Safety Products | T-Rex Conveyor Belt Covers in PVC
70×18 mmT-REX Conveyor Covers PVC | Profile 70x18 400 – 1400 mm
(other widths upon request)
SteelT-REX Conveyor Covers PVC | Fixings in Steel
Conveyor Covers Steel
T-Rex Safety Products | T-Rex Conveyor Belt Covers in Steel T-Rex Safety Products | T-Rex Conveyor Belt Covers in Steel
76×18 mmT-REX Conveyor Covers Steel | Profile 76x18

400 – 1400 mm
(other widths upon request)
NylonT-REX Conveyor Covers Steel | Fixings in Nylon

Please contact our sales team for more information or click here for more T-Rex Safety Products.

Tru-Trac Case Study, prevent misalignment | T-REX Rubber International

Tru-Trac Case Study | Dual Return Tracker

Another good example of how to solve misalignment

Summary of Problem
Frequent stoppages of the conveyor belt for unknown reasons when running in dryer conditions without a counter weight.

Summary of Solution
Tru-Trac recommended a complete conveyor survey and had mine personnel describe the issues. After thorough analysis, Tru-Trac recommended installing two 2400 mm Dual Return trackers.

Summary of Results
Following Tru-Trac’s improvements, the conveyor belt now remains centered when running without a load. As a result, on-site staff can now use the conveyor belt at all times and production in the copper mine has increased.

Read the full case study on the new website of Tru-Trac!

Tru-Trac Case Study, Dual Return Tracker | T-REX Rubber International
Tru-Trac Case Study, Dual Return Trackers | Prevent belt misalignment
T-REX SCREW SPLICE | T-Rex Rubber International

T-Rex Screw Splice

T-Rex Repair Material | T-Rex Screw Splice

Splicing Material for making quick splices without vulcanization press or glue!
T-Rex Screw Splice is flexible so it can be applied with installation with scraper.
Smoother surface than most mechanical solutions.
Quick and reliable belt splicing solution.
Designed to be used without special belt maintenance tools.

Installation is ready for production after belt splicing is ready (no curing time and no waiting time).

Please click here to open PDF

Available in complete kit (25 meters) or per meter
Type Typical textile belts
Quality
TS35 EP250 EP 315 EP400 NQ, HTR, OR, Stainless
TS63 EP500 EP630 EP800 NQ, HTR, OR, Stainless
TS80 EP800 EP1000 NQ, HTR
NQ = Normal Quality
HTR = Heat Resistant 200° EPDM
OR = Oil and grease Resistant
STAINLESS = Stainless Steel screws

Watch the product video here:

Please contact our sales team for more information or click here for more T-Rex Repair Material.

T-Rex Wear Protection | T-Rex Economy Rubber

T-REX Economy

T-Rex Wear Protection | T-Rex Economy

  • Black, wear resistant rubber
  • Hardness ± 60° – 65° Shore
  • Without bonding layer

Please click here to open PDF

T-REX60 ECONOMY, BLACK | Side Skirt Rubber | without bonding layer 
Thickness10 mm
Length20.000 mm
Width100, 120, 150 & 200 mm
MINI GROOVED, BLACK | without bonding layer 
Thickness3 & 6 mm
Length10.000 mm
Width1.200 mm
ECONOMY RUBBER SHEETS | MULTI-PURPOSE RUBBER, BLACK, without bonding layer 
TypeSBR, NBR & EPDM
Thicknesses2, 3, 4, 5, 6, 8 & 10 mm
Length10.000 mm
Width2.000 mm

Please contact our sales team for more information or click here for more T-Rex Wear Protection.

T-Rex Repair Material | Permaflex Starter Kit

PERMA-FLEX

T-REX Repair Material | PERMA-FLEX Starter Kit

The material cures to ready for touch in 2 minutes.
The repair area can be buffed in 30 minutes.
100% solids and no Volatile Organic Compounds (VOC).
Maximum hardness of 60 Shore A.
A rapid and permanent flexible repair.
Can be used as repair for conveyor belts, drum lagging or lining.

Please click here to open PDF

T-Rex Repair Material | Permaflex Starter Kit

Content Starter Kit:
5 cartridges 60SLF 200 x 200 ml, 1 Primer PF-84, 10 x mixing tips & 1 dispensing tool.

Please contact our sales team for more information about this Starter Kit!

Please click here for more T-Rex Repair Material.

T-Rex Tools | Belt Lifting Station

T-Rex Belt Lifting Station

T-Rex Tools | Belt Lifting Station

A safe and smart tool for conveyor belt maintenance

  • It reduces risk for injury when lifting the conveyor belt for service or maintenance.
  • Made of lightweight aluminium, easy to transport.
  • Suitable for belt width between 650 mm to 1.000 mm.

 
T-Rex Tools | Belt Lifting StationT-Rex Tools | Belt Lifting StationT-Rex Tools | Belt Lifting Station
 

Specifications :
Length
1 150 mm
Width
315 mm
Weight 14,9 kg

Please click here to open PDF

No special tools needed!


Please contact our sales team for more information or click here for more T-Rex Tools.

T-REX Drum Lagging, Ceramic in Rubber CERA-REX

Cera-REX Drum Lagging

T-Rex Drum Lagging, Cera-REX Ceramic in Rubber

Highly resistant to wear
Single-row ceramic, with round knobs
Simple and durable affixing with universal bonding systems

T-Rex Drum Lagging | Cera-REX Ceramic in Rubber

T-Rex Drum Lagging | Cera-REX Ceramic in Rubber

T-Rex Drum Lagging Cera-Rex is especially suitable for drive pulleys subjected to extreme wear

Please click here to open PDF

With bonding layer
Thickness 12 mm
Length 10.000 mm
Width 380 mm

Please contact our sales team for more information or click here for more product information.

T-Rex Components, Polyethylene

Polyethylene

T-Rex Components, Polyethylene

Properties
Very good wear and abrasion resistance
High impact resistance
Low friction coefficent

Application
Wear Protection
Belt Cleaning
Conveyor Belt Protection

Please click here to open PDF

UHMW PE 500 & 1000
Hardness ± 95° Shore
Dimension per plate  2 050 x 1 020 mm
Thickness 2 – 60 mm
Available colours green, black and white

T-Rex Components | Polyethylenee T-Rex Components | Polyethylene Polyurethane T-Rex Components | Polyethylenee T-Rex Components | Polyethylenee

Please contact our sales team for more information or click here for more product information.